2021-2022 Academic Catalog 
    
    May 14, 2024  
2021-2022 Academic Catalog [ARCHIVED CATALOG]

Course Descriptions


Comprehensive Articulation Agreement

Many of the courses described in this section include references to the Comprehensive Articulation Agreement (CAA). The Comprehensive Articulation Agreement was developed by the North Carolina Community College System and the University of North Carolina System to address the transfer needs of students between systems.

All courses in this section with a statement about the CAA have been deemed transferable by the two systems. However, even for courses included in the CAA, most colleges and universities will accept for transfer only those courses with a grade of “C” or better.

In addition to the sixteen public universities of the University of North Carolina System, many of the private colleges and universities honor the conditions of the Comprehensive Articulation Agreement.

Writing Intensive Courses

Some courses in the College Transfer program are designated as “Writing Intensive Courses.” The following description of writing intensive courses are adapted from Writing Across the Curriculum Program Handbook published by East Carolina University:

Writing intensive courses emphasize academic writing, professional writing, writing-to-learn, and a combination of writing approaches or collaborative assignments from  faculty in different disciplines. A writing intensive course treats writing both as a tool for learning and a skill to be learned. Although a number of models exist for teachers  to choose from, a writing intensive class will include a variety of writing assignments from the following list to total approximately 30-50 pages of student writing:

  • one long edited paper (12-15 pages) presented in draft and two preparation paper
  • four or five shorter (4-5 pages) edited papers
  • journal assignments (30-50 pages) of unedited reflective writing
  • a series of informal writing-to-learn assignments

It is highly recommended that students successfully complete ENG 111 prior to enrollment in any Writing Intensive Courses.

Courses Unique to a Concentration

When programs of study provide optional field-specific concentrations, they are generally intended for students majoring in the particular program of study. These courses will have an enrollment restriction listed as a local prerequisite.

To be eligible for financial aid, students must be enrolled in courses that are within their approved program(s) of study.

Course Requisites

It is the responsibility of Pitt Community College to ensure that students have satisfied prerequisite and corequisite requirements by documenting that they have either completed the appropriate courses or have demonstrated that they have the appropriate knowledge and skills required for admission to a course. Methods of fulfilling course requisites that the college will recognize other than completing the required requisites as stated on the current program of study include the following:

  • Transfer of credits from other educational organizations based on careful comparison of the courses being transferred in.
  • Successful completion of a test designed to assess student readiness for a particular course in lieu of requisites.
  • Demonstration of student mastery of material that would be covered in the requisite courses in a manner set up to be standard for all students in a particular program.
  • Work experience deemed by faculty expert to be equivalent to the requisite course work.

Pitt Community College is responsible for keeping records of all course requisite fulfillments by students.

 

Turfgrass Management

  
  • TRF 110 - Intro Turfgrass Cult & ID


    Class Hours: 3 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 4

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course covers the principles of reproduction, growth development, species characteristics, establishment and maintenance of golf courses and sports fields, and lawns. Topics include principles of reproduction, growth development, species characteristics, establishment and maintenance of golf courses and sports fields, and lawn applications. Upon completion, students should be able to identify turfgrass species and develop an establishment and maintenance plan for high quality turf areas in accordance with sustainable practices.

Transportation Technology

  
  • TRN 110 - Intro to Transport Tech


    Class Hours: 1 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 2

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course covers workplace safety, hazardous materials, environmental regulations, hand tools, service information, basic concepts, vehicle systems, and common transportation industry terminology. Topics include familiarization with major vehicle systems, proper use of various hand and power tools, material safety data sheets, and personal protective equipment. Upon completion, students should be able to demonstrate appropriate safety procedures, identify and use basic shop tools, and describe government regulations regarding transportation repair facilities.
  
  • TRN 120 - Basic Transp Electricity


    Class Hours: 4 Lab Hours: 3 Clinic/WkExp Hours: 0 Credit Hours: 5

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: TRN 120A  

    Additional Fees: $11.25 Lab

    This course covers basic electrical theory, wiring diagrams, test equipment, and diagnosis, repair and replacement of batteries, starters, and alternators. Topics include Ohm’s Law, circuit construction, wiring diagrams, circuit testing, and basic troubleshooting. Upon completion, students should be able to properly use wiring diagrams, diagnose, test, and repair basic wiring, battery, starting, charging, and electrical concerns.
  
  • TRN 120A - Basic Transp Electrical Lab


    Class Hours: 0 Lab Hours: 3 Clinic/WkExp Hours: 0 Credit Hours: 1

    Prerequisite: None
    Corequisite: TRN 120 
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $11.25 Lab

    This course provides a Lab that allows students to enhance their understanding of electrical components and circuits used in the transportation industry. Topics include inspection, diagnosis, and repair of electrical components and circuits using appropriate service information for specific transportation systems. Upon completion, students should be able to diagnose and service electrical components and circuits used in transportation systems.
  
  • TRN 140 - Transp Climate Control


    Class Hours: 1 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 2

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: TRN 140A  

    Additional Fees: $7.50 Lab

    This course covers the theory of refrigeration and heating, electrical/electronic/pneumatic controls, and diagnosis and repair of climate control systems. Topics include diagnosis and repair of climate control components and systems, recovery/recycling of refrigerants, and safety and environmental regulations. Upon completion, students should be able to diagnose and repair vehicle climate control systems.
  
  • TRN 140A - Transp Climate Cont Lab


    Class Hours: 1 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 2

    Prerequisite: None
    Corequisite: TRN 140 
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course provides experiences for enhancing student skills in the diagnosis and repair of transportation climate control systems. Emphasis is placed on reclaiming, recovery, recharging, leak detection, climate control components, diagnosis, air conditioning equipment, tools and safety. Upon completion, students should be able to describe the operation, diagnose, and safely service climate control systems using appropriate tools, equipment, and service information.
  
  • TRN 145 - Adv Transp Electronics


    Class Hours: 2 Lab Hours: 3 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: TRN 120 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $11.25 Lab

    This course covers advanced transportation electronic systems including programmable logic controllers, on-board data networks, telematics, high voltage systems, navigation, collision avoidance systems and electronic accessories. Topics include interpretation of wiring schematics, reprogramming PLCs, diagnosing and testing data networks and other electronic concerns. Upon completion, students should be able to reprogram PLCs, diagnose and test data networks and other electronic concerns, and work safely with high voltage systems.
  
  • TRN 170 - Pc Skills for Transp


    Class Hours: 1 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 2

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    This course introduces students to personal computer literacy and Internet literacy with an emphasis on the transportation service industry.

Work-Based Learning

  
  • WBL 110 - World of Work


    Class Hours: 1 Lab Hours: 0 Clinic/WkExp Hours: 0 Credit Hours: 1

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $39.00 NCRC Testing

    This course covers basic knowledge necessary for gaining and maintaining employment. Topics include job search skills, work ethic, meeting employer expectations, workplace safety, and human relations. Upon completion, students should be able to successfully make the transition from school to work.
  
  • WBL 111 - Work-Based Learning I


    Class Hours: 0 Lab Hours: 0 Clinic/WkExp Hours: 10 Credit Hours: 1

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies.
  
  • WBL 112 - Work-Based Learning I


    Class Hours: 0 Lab Hours: 0 Clinic/WkExp Hours: 20 Credit Hours: 2

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies.
  
  • WBL 115 - Work-Based Learning Seminar I


    Class Hours: 1 Lab Hours: 0 Clinic/WkExp Hours: 0 Credit Hours: 1

    Prerequisite: None
    Corequisite: WBL 111 , WBL 112 , WBL 113, or WBL 114
    Local Prerequisite: None
    Local Corequisite: None

    At PCC, the course description is written by the individual departments.
  
  • WBL 121 - Work-Based Learning II


    Class Hours: 0 Lab Hours: 0 Clinic/WkExp Hours: 10 Credit Hours: 1

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. At PCC, course prerequisites are set by each department.
  
  • WBL 122 - Work-Based Learning II


    Class Hours: 0 Lab Hours: 0 Clinic/WkExp Hours: 20 Credit Hours: 2

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. At PCC, course prerequisites are set by each department.
  
  • WBL 125 - Work-Based Learning Seminar II


    Class Hours: 1 Lab Hours: 0 Clinic/WkExp Hours: 0 Credit Hours: 1

    Prerequisite: None
    Corequisite: WBL 121 , WBL 122 , WBL 123, or WBL 124
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course provides a seminar for preparation, discussion, and integration of the work experience of WBL 121 . Emphasis is placed on orientation to the college-approved work site, integrating classroom learning with related work experiences, and professional development.

Web Technologies

  
  • WEB 115 - Web Markup and Scripting


    Class Hours: 2 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: CTI 110 
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course introduces Worldwide Web Consortium (W3C) standard client-side Internet programming using industry-established practices. Topics include JavaScript, markup elements, style sheets, validation, accessibility, standards, and browsers. Upon completion, students should be able to develop hand-coded web pages using current markup standards.
  
  • WEB 140 - Web Development Tools


    Class Hours: 2 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: CTI 110 
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course provides an introduction to web development software suites. Topics include the creation of web sites and applets using web development software. Upon completion, students should be able to create entire web sites and supporting applets.
  
  • WEB 210 - Web Design


    Class Hours: 2 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: CTI 110 
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course introduces intermediate to advanced web design techniques. Topics include customer expectations, advanced markup language, multimedia technologies, usability and accessibility practices, and techniques for the evaluation of web design. Upon completion, students should be able to employ advanced design techniques to create high impact and highly functional web sites.
  
  • WEB 213 - Internet Mkt & Analytics


    Class Hours: 2 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $11.25 Lab

    This course introduces students to Search Engine Optimization (SEO), Search Engine Marketing (SEM) and web analytics. Topics include Search Engine Optimization (SEO), Pay Per Click advertising (PPC), Search Engine Marketing (SEM), web analytics, eye-tracking software and email marketing. Upon completion, students should be able to set up, monitor and maintain SEO optimized websites; and develop strategies for online marketing and advertising plans.
  
  • WEB 215 - Adv Markup and Scripting


    Class Hours: 2 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: WEB 115 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course covers advanced programming skills required to design Internet applications. Emphasis is placed on programming techniques required to support Internet applications. Upon completion, students should be able to design, code, debug, and document Internet-based programming solutions to various real-world problems using an appropriate programming language.
  
  • WEB 250 - Database Driven Websites


    Class Hours: 2 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: CTI 110 
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course introduces dynamic (database-driven) website development. Topics include the use of basic database CRUD statements (create, read, update and delete) incorporated into web applications, as well as in software architecture principles. Upon completion, students should be able to design and develop database driven web applications according to industry standards.
  
  • WEB 289 - Internet Technologies Project


    Class Hours: 1 Lab Hours: 4 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: CTI 110 , CTI 120 , and CTS 115 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $15.00 Lab

    This course provides an opportunity to complete a significant Web technologies project from the design phase through implementation with minimal instructor support. Emphasis is placed on project definition, documentation, installation, testing, presentation, and training. Upon completion, students should be able to complete an Internet project from the definition phase through implementation.

Welding

  
  • WLD 110 - Cutting Processes


    Class Hours: 1 Lab Hours: 3 Clinic/WkExp Hours: 0 Credit Hours: 2

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $11.25 Lab

    This course introduces oxy-fuel and plasma-arc cutting systems. Topics include safety, proper equipment setup, and operation of oxy-fuel and plasma-arc cutting equipment with emphasis on straight line, curve and bevel cutting. Upon completion, students should be able to oxy-fuel and plasma-arc cut metals of varying thickness.
  
  • WLD 112 - Basic Welding Processes


    Class Hours: 1 Lab Hours: 3 Clinic/WkExp Hours: 0 Credit Hours: 2

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $11.25 Lab

    This course introduces basic welding and cutting. Emphasis is placed on beads applied with gases, mild steel fillers, and electrodes and the capillary action of solder. Upon completion, students should be able to set up welding and oxy-fuel equipment and perform welding, brazing, and soldering processes.
  
  • WLD 115 - SMAW (Stick) Plate


    Class Hours: 2 Lab Hours: 9 Clinic/WkExp Hours: 0 Credit Hours: 5

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $33.75 Lab

    This course introduces the shielded metal arc (stick) welding process. Emphasis is placed on padding, fillet, and groove welds in various positions with SMAW electrodes. Upon completion, students should be able to perform SMAW fillet and groove welds on carbon plate with prescribed electrodes.
  
  • WLD 116 - SMAW (Stick) Plate/Pipe


    Class Hours: 1 Lab Hours: 9 Clinic/WkExp Hours: 0 Credit Hours: 4

    Prerequisite: WLD 115 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $33.75 Lab

    This course is designed to enhance skills with the shielded metal arc (stick) welding process. Emphasis is placed on advancing manipulative skills with SMAW electrodes on varying joint geometry. Upon completion, students should be able to perform groove welds on carbon steel with prescribed electrodes in the flat, horizontal, vertical, and overhead positions.
  
  • WLD 121 - GMAW (MIG) FCAW/Plate


    Class Hours: 2 Lab Hours: 6 Clinic/WkExp Hours: 0 Credit Hours: 4

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $22.50 Lab

    This course introduces metal arc welding and flux core arc welding processes. Topics include equipment setup and fillet and groove welds with emphasis on application of GMAW and FCAW electrodes on carbon steel plate. Upon completion, students should be able to perform fillet welds on carbon steel with prescribed electrodes in the flat, horizontal, and overhead positions.
  
  • WLD 122 - GMAW (MIG) Plate/Pipe


    Class Hours: 1 Lab Hours: 6 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: WLD 121 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $22.50 Lab

    This course is designed to enhance skills with the gas metal arc (MIG) welding process. Emphasis is placed on advancing skills with the GMAW process making groove welds on carbon steel plate and pipe in various positions. Upon completion, students should be able to perform groove welds with prescribed electrodes on various joint geometry.
  
  • WLD 131 - GTAW (TIG) Plate


    Class Hours: 2 Lab Hours: 6 Clinic/WkExp Hours: 0 Credit Hours: 4

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $22.50 Lab

    This course introduces the gas tungsten arc (TIG) welding process. Topics include correct selection of tungsten, polarity, gas, and proper filler rod with emphasis placed on safety, equipment setup, and welding techniques. Upon completion, students should be able to perform GTAW fillet and groove welds with various electrodes and filler materials.
  
  • WLD 132 - GTAW (TIG) Plate/Pipe


    Class Hours: 1 Lab Hours: 6 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: WLD 131 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $22.50 Lab

    This course is designed to enhance skills with the gas tungsten arc (TIG) welding process. Topics include setup, joint preparation, and electrode selection with emphasis on manipulative skills in all welding positions on plate and pipe. Upon completion, students should be able to perform GTAW welds with prescribed electrodes and filler materials on various joint geometry.
  
  • WLD 141 - Symbols & Specifications


    Class Hours: 2 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course introduces the basic symbols and specifications used in welding. Emphasis is placed on interpretation of lines, notes, welding symbols, and specifications. Upon completion, students should be able to read and interpret symbols and specifications commonly used in welding.
  
  • WLD 151 - Fabrication I


    Class Hours: 2 Lab Hours: 6 Clinic/WkExp Hours: 0 Credit Hours: 4

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    This course introduces the basic principles of fabrication. Emphasis is placed on safety, measurement, layout techniques, and the use of fabrication tools and equipment. Upon completion, students should be able to perform layout activities and operate various fabrication and material handling equipment.
  
  • WLD 212 - Inert Gas Welding


    Class Hours: 1 Lab Hours: 3 Clinic/WkExp Hours: 0 Credit Hours: 2

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    This course introduces inert gas-shielded welding methods (MIG/TIG). Topics include correct selection of consumable and non-consumable electrodes, equipment setup, safety, and welding techniques. Upon completion, students should be able to perform inert gas welding in flat, horizontal, and overhead positions. Clean room procedures will be covered, with students being able to demonstrate the industry regulations and procedures for clean room processing upon completion of course.
  
  • WLD 215 - SMAW (Stick) Pipe


    Class Hours: 1 Lab Hours: 9 Clinic/WkExp Hours: 0 Credit Hours: 4

    Prerequisite: WLD 115  or WLD 116 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $33.75 Lab

    This course covers the knowledge and skills that apply to welding pipe.
  
  • WLD 221 - GMAW (MIG) Pipe


    Class Hours: 1 Lab Hours: 6 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: WLD 122 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $22.50 Lab

    This course covers the knowledge and skills that apply to welding pipe. Topics include pipe positions, joint geometry, and preparation with emphasis placed on bead application, profile, and discontinuities. Upon completion, students should be able to perform GMAW welds to applicable codes on pipe with prescribed electrodes in various positions.
  
  • WLD 231 - GTAW (TIG) Pipe


    Class Hours: 1 Lab Hours: 6 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: WLD 132 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $22.50 Lab

    This course covers gas tungsten arc welding on pipe. Topics include joint preparation and fit up with emphasis placed on safety, GTAW welding technique, bead application, and joint geometry. Upon completion, students should be able to perform GTAW welds to applicable codes on pipe with prescribed electrodes and filler materials in various pipe positions. Clean room procedures will be covered, with students being able to demonstrate the industry regulations and procedures for clean room processing upon completion of course.
  
  • WLD 262 - Inspection & Testing


    Class Hours: 2 Lab Hours: 2 Clinic/WkExp Hours: 0 Credit Hours: 3

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $7.50 Lab

    This course introduces destructive and non-destructive testing methods. Emphasis is placed on safety, types and methods of testing, and the use of testing equipment and materials. Upon completion, students should be able to understand and/or perform a variety of destructive and nondestructive testing processes.
  
  • WLD 265 - Automated Welding/Cutting


    Class Hours: 2 Lab Hours: 6 Clinic/WkExp Hours: 0 Credit Hours: 4

    Prerequisite: WLD 110  and WLD 121 
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $22.50 Lab

    This course introduces automated welding equipment and processes. Topics include setup, programming, and operation of automated welding and cutting equipment. Upon completion, students should be able to set up, program, and operate automated welding and cutting equipment.
  
  • WLD 268 - Robotic Gas Metal Arc Welding


    Class Hours: 2 Lab Hours: 6 Clinic/WkExp Hours: 0 Credit Hours: 4

    Prerequisite: None
    Corequisite: None
    Local Prerequisite: None
    Local Corequisite: None

    Additional Fees: $22.50 Lab

    This course provides a comprehensive overview of the tasks and responsibilities required of the robotic welding technician. Topics include robotic and welding safety, proper equipment usage and care, robotic welding programming, various automated welding applications, automated Gas Metal Arc Welding (GMAW) processes, equipment controls and settings, and weld quality. Upon completion, students should be able to set up, program, operate, and successfully run robotic gas welding equipment for various welding applications.
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10